Results for 'Winterizing Plugs'

Water in the Cirrus Two Tier Fountain bubbles from the fountainÂ’s center, covering the inlaid spirals. From there, the water overflows into the unadorned basin below. Made of quality cast stone, the Cirrus Two Tier Fountain stands just over 2Â’ tall.

• Dimensions: 27.75" long x 27.75" wide x 24.5" high and weighs 238 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Cirrus Two Tier Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Enjoy the Cirrus Two Tier Fountain today!

Despite standing just over 2Â’ tall, the Equinox Two Tier Fountain makes quite the statement! Water bubbling from the fountainÂ’s center cascades over straight lines etched into the first tier, then continues down into the larger basin below.

• Dimensions: 27.75" long x 27.75" wide x 24.5" high and weighs 240 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Equinox Two Tier Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Make a statement with the Equinox Two Tier Fountain!

There are numerous ways to enjoy the Disappearing Leaf Sculpture Fountain! The cast stone leaf sculpture bubbles water from its center and drizzles it delicately over the leaf. The round fiberglass basin, designed to be topped with river stones (not included), can be placed above or below ground. The basin provides easy access to the pump with a removable access door.

• Dimensions: 30" long x 30" wide x 18" high and weighs 126 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Disappearing Leaf Sculpture Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

No matter how it is displayed, the Disappearing Leaf Sculpture Fountain is a beautiful addition to any garden!

Enjoy the look of a tiered fountain without the space constraints! The Hydrangea Leaves Two Tier Fountain is just 28” round and only 24” tall. This beautiful fountain spills water from a bowl inlaid with hydrangea leaves into a larger, unadorned basin below.

• Dimensions: 27.75" long x 27.75" wide x 24.5" high and weighs 242 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Hydrangea Leaves Two Tier Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Enjoy the beauty of the Hydrangea Leaves Two Tier Fountain today!

The Mini Element with Birds Fountain is an adorable tabletop fountain featuring 2 perched birds overlooking the waterfall beneath them. Perhaps theyÂ’re wondering if they should take a dip?

• Dimensions: 6" long x 11.5" wide x 10.25" high and weighs 23 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Mini Element With Birds Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships via UPS
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Enjoy the Mini Element with Birds Fountain today! Order now!

The Mini Element Zen Frog Fountain is a whimsical tabletop fountain depicting a mini zen frog enjoying the sounds of the waterfall beneath him. Was it the sound of the water that helped him get so relaxed?

• Dimensions: 6" long x 11.5" wide x 15" high and weighs 28 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the English Moss (EM) patina/finish, the Mini Element Zen Frog Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships via UPS
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Relax with your own Mini Element Zen Frog Fountain today!

The Rochefort Fountain looks great from every angle! A square pedestal supports the large, round bowl which collects the water poured from the fountainÂ’s center. The interesting centerpiece spills water from four evenly-spaced spouts. This unique fountain makes a great focal point!

• Dimensions: 29.5" long x 29.5" wide x 36.25" high and weighs 224 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Rochefort Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Grab everyoneÂ’s attention with the Rochefort Fountain!

The Paradiso Fountain is a small, birdbath-style fountain which bubbles water from its center into a simple round basin. Two birds snuggle together on the fountainÂ’s edge.

• Dimensions: 22.25" long x 22.25" wide x 15.5" high and weighs 68 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Greystone (GS) patina/finish, the Paradiso Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Add a surprising touch to any outdoor space with the Paradiso Fountain!

The Charleston Fountain features a pineapple finial which spurts water from its center, sending water down over two ornate tiers, each with a delicate leaf design. This beautiful fountain is sure to be the center of attention!

• Dimensions: 46.5" long x 46.5" wide x 83.5" high and weighs 913 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Charleston Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Enjoy the Charleston Fountain. Order yours today!

Beautifully detailed, the Charleston Fountain in Basin makes a huge statement wherever it is placed! A pineapple finial spurts water from its center, sending water down over two ornate tiers and into the large basin below. Each tier has a delicate leaf design over which the water flows on its way downward.

• Dimensions: 104" long x 104" wide x 86" high and weighs 3429 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime. Note: To reduce weight and for better maneuverability, the6-foot fountain basin is made of lightweight Limestone Lite® material. The basin is designed to be enclosed by six pieces of cast stone coping.
• Shown in the Alpine Stone (AS) patina/finish, the Charleston Fountain in Basin is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain. Due to the size of this fountain, professional installation is recommended.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Order the elegant Charleston Fountain in Basin today!

Bringing an old-world look to a modern household, the ceramic Garden Pagoda Solar Lantern is made to look like an ancient sand-cast lantern. Decorative latticework covers the solar light inside while the solar panel sits on top of the lantern. Since no plugs or cords are needed, the Garden Pagoda Solar Lantern is an ultra convenient garden accent!

• The Garden Pagoda Solar Lantern measures 6.6 inches Wide (Left to Right), 6.6 inches Deep (Front to Back), 8.5 inches Tall. Weighs 3.5 pounds.
• The Garden Pagoda Solar Lantern is made out of Ceramic materials.
• The Garden Pagoda Solar Lantern is designed for Outdoor use.
• Ships via UPS to any address in the contigious 48 United States
• Ships in 2 business days from order date

Not for the meek at heart, the Avignon Lion Fountain makes a bold statement to anyone who approaches. Hand-made from cast stone, this grand fountain features a scrolled back with the regal lion's face set auspiciously in the center. From his mouth comes a steady stream of water, trickling down into two tiered bowls before pouring over into the magnificent basin below. Reminiscent of the village wells in ancient Rome, the Avignon Lion Fountain has a chiseled, worn look as if it were centuries old (we'll never tell your secret!).

• Durably constructed of high-quality cast stone, this fountain is manufactured entirely in the USA.
• Shown in the Relic Terra (RT) Fountain Finish.
• The Avignon Lion Fountain is 60 inches tall, 69 inches wide and 31 inches front to back. It weighs 1,744 pounds.
• Our fountains provide value pricing, superior craftsmanship, and minimal maintenance. Each includes a UL listed and approved variable speed pump. No plumbing is required, as water recirculates within the fountain.
• Plugs in to any standard 3-prong household electrical outlet.
• Shipping for this fountain is available to any address in the Continental USA. It normally ships from the factory within 6-7 weeks of the order date, and will arrive securely packed on a pallet via truck. Each fountain includes assembly instructions. The truck driver will place your fountain on your property, but cannot assist with final installation.

Perfect for indoor and outdoor use, the Avalon Lion fountain is a must-have for any decor.