Results for 'Fountain'

The Cirrus Garden Terrace Fountain bubbles water from the center of a spiral-adorned disc before collecting it again in the bowl-shaped basin. Part of Campania InternationalÂ’s Garden Terrace collection, the Cirrus Garden Terrace Fountain recirculates water within itself and does not require any special plumbing.

• Dimensions: 16" long x 16" wide x 6.75" high and weighs 44 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Pietra Vecchia (PV) patina/finish, the Cirrus Garden Terrace Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships via UPS
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Enjoy the sounds of bubbling water with the Cirrus Garden Terrace Fountain!

Hydrangea Leaves gently dance in the water of the Hydrangea Leaves Garden Terrace Fountain. The leaf-adorned center disc bubbles water from its center, out over the leaf imprints, and into the basin below. Part of Campania InternationalÂ’s Garden Terrace collection, the Hydrangea Leaves Garden Terrace Fountain recirculates water within itself and does not require any special plumbing.

• Dimensions: 16" long x 16" wide x 6.75" high and weighs 45 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the English Moss (EM) patina/finish, the Hydrangea Leaves Garden Terrace Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships via UPS
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Enjoy the Hydrangea Leaves Garden Terrace Fountain in your home today!

Create a unique and elegant Italian garden accent with the alluring Venetian Fountain. Enchantingly beautiful, this dramatic tiered fountain will add a soothing and tranquil feature to your garden setting. The durable, high quality construction of this fountain will blend seamlessly with any decor or style. This charming fountain is sure to be the graceful focal point you have been searching for!

• The Ventian Fountain measures 33" in diameter x 57" tall

• Plugs into any standard electrical outlet. Requires no special electrical hookups.
• Includes whisper quiet fountain pump and all necessary accessories.
• Normally leaves our warehouse within 5 business days of order date.
• Ships via Fed Ex ground.
• Outdoor floor fountain, in moss finish.
• Includes 6 light bulbs
• Order your Ventian Fountain today!

The enchanting Vestaglia Fountain is a true artistic accent for your indoor wall space! This beautiful fountain features gently flowing water moving from one figure to the next. The rich tones of this fountain is sure to create a lovely viewing experience for you and all of your guests! Enjoy the tranquility and softness this soothing fountain will add to your home!

• The Vestaglia Wall Fountain measures 17" long x 7" wide x 30" tall and weighs 17.6 lbs.
• Requires no plumbing. Water re-circulates within the fountain.
• Plugs into any standard electrical outlet. Requires no special electrical hookups.
• Includes whisper quiet fountain pump and all necessary accessories.
• Normally leaves our warehouse within 5 business days of order date.
• Ships via Fed Ex ground.
• Includes light bulbs
• Cord cover Included.
• Indoor wall fountain, burnished gold finish.

Whimsical yet prudent, the Cirrus Birdbath Fountain is a wonderful accent for any space! The basic round pedestal supports an unadorned bowl filled with a center disk covered in miniature spirals. Water bubbles from the center of the disk to coat the spirals in a layer of water before it collects in the basin below.

• Dimensions: 20.5" long x 20.5" wide x 30.25" high and weighs 132 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Cirrus Birdbath Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Enjoy the Cirrus Birdbath Fountain in your yard!

Stylish yet modest, the Equinox Birdbath Fountain is minimally adorned with water bubbling out over the simple lines etched into the center disk. The Equinox Birdbath Fountain quietly invites feathered friends for a drink while you enjoy the gentle sounds of running water.

• Dimensions: 20.5" long x 20.5" wide x 30.25" high and weighs 134 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Terra Nera (TN) patina/finish, the Equinox Birdbath Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Unwind with the Equinox Birdbath Fountain. Order yours today!

The Hydrangea Leaves Birdbath Fountain adds a look of sophistication wherever it is placed. A disk imprinted with hydrangeas leaves sits within an unadorned bowl as water bubbles from its center. Made of cast stone, the Hydrangea Leaves Birdbath Fountain is a beautiful and durable accent for any space!

• Dimensions: 20.5" long x 20.5" wide x 30.25" high and weighs 136 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Hydrangea Leaves Birdbath Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Order the stylish Hydrangea Leaves Birdbath Fountain!

Water in the Cirrus Two Tier Fountain bubbles from the fountainÂ’s center, covering the inlaid spirals. From there, the water overflows into the unadorned basin below. Made of quality cast stone, the Cirrus Two Tier Fountain stands just over 2Â’ tall.

• Dimensions: 27.75" long x 27.75" wide x 24.5" high and weighs 238 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Cirrus Two Tier Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Enjoy the Cirrus Two Tier Fountain today!

Despite standing just over 2Â’ tall, the Equinox Two Tier Fountain makes quite the statement! Water bubbling from the fountainÂ’s center cascades over straight lines etched into the first tier, then continues down into the larger basin below.

• Dimensions: 27.75" long x 27.75" wide x 24.5" high and weighs 240 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Equinox Two Tier Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Make a statement with the Equinox Two Tier Fountain!

There are numerous ways to enjoy the Disappearing Leaf Sculpture Fountain! The cast stone leaf sculpture bubbles water from its center and drizzles it delicately over the leaf. The round fiberglass basin, designed to be topped with river stones (not included), can be placed above or below ground. The basin provides easy access to the pump with a removable access door.

• Dimensions: 30" long x 30" wide x 18" high and weighs 126 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Disappearing Leaf Sculpture Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

No matter how it is displayed, the Disappearing Leaf Sculpture Fountain is a beautiful addition to any garden!

Enjoy the look of a tiered fountain without the space constraints! The Hydrangea Leaves Two Tier Fountain is just 28” round and only 24” tall. This beautiful fountain spills water from a bowl inlaid with hydrangea leaves into a larger, unadorned basin below.

• Dimensions: 27.75" long x 27.75" wide x 24.5" high and weighs 242 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Hydrangea Leaves Two Tier Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships on a pallet via truck. The truck driver will place your palletized item on your property but cannot assist with final placement or installation.
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Enjoy the beauty of the Hydrangea Leaves Two Tier Fountain today!

The Mini Element with Birds Fountain is an adorable tabletop fountain featuring 2 perched birds overlooking the waterfall beneath them. Perhaps theyÂ’re wondering if they should take a dip?

• Dimensions: 6" long x 11.5" wide x 10.25" high and weighs 23 pounds.
• Proudly made in the U.S.A. from premium cast stone concrete to last a lifetime.
• Shown in the Alpine Stone (AS) patina/finish, the Mini Element With Birds Fountain is available in your choice of classic and distinct patinas. Each of these finishes is applied by hand in a multi-step process to make every piece a uniquely beautiful original. Unlike a painted finish, the finish on this statue does not prevent the natural aging process, and will therefore weather naturally in an outdoor environment.
• Free Shipping to any address in the Continental USA.
• Normally ships from the factory within 2 weeks.
• Ships via UPS
• Includes a whisper-quiet, UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
• Cord plugs into any standard 3-prong electrical outlet. An outdoor-rated extension cord can be used to lengthen the cord.
• Be sure to place your fountain on a solid, level foundation. Specific assembly and care instructions are included with the fountain.
• Winter Care Information: Protect your fountain from small chips and cracks by draining and covering it in freezing weather. Please see our use and care page for further suggestions. It is also recommended that the pump be brought indoors during periods of freezing weather.

Enjoy the Mini Element with Birds Fountain today! Order now!